{ "id": "6-light-wood-bead-chandelier", "sku": "6-light-wood-bead-chandelier", "title": "6-Light Wood Bead Farmhouse Chandelier", "slug": "6-light-wood-bead-chandelier", "price": 259.99, "currency": "USD", "availability": "in_stock", "category": "farmhouse-chandeliers", "category_label": "Farmhouse & Rustic Chandeliers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "5.44 kg", "images": [ "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/main-6-light-wood-bead-chandelier.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-2.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-3.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-4.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-5.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-6.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-7.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-8.jpg", "https://americanchandelier.net/dropship-images/farmhouse-chandeliers/6-light-wood-bead-chandelier/6-light-wood-bead-chandelier-9.jpg" ], "description_short": "Six candle-style E12 lights, an iron and wood frame wrapped with hemp rope, and an adjustable chain that fits ceilings from standard to soaring.", "description": "The problem with most dining room lighting\n\nWalk into a lot of homes and the dining light is an afterthought. Either it is a flush ceiling fitting left over from the builder, or it is a downlight grid that sprays even brightness across the whole room. Both do the job of making the room visible. Neither makes it feel like anywhere you want to linger after the plates are cleared.\n\nA hanging fixture fixes that, because it changes where the light comes from. Instead of a flat ceiling wash, you get a pool of warm light sitting just above the table. The edges of the room fall back into softer shadow. Faces look better. Food looks better. The table becomes the center of the room rather than a piece of furniture parked under a bulb.\n\nA wood bead chandelier adds a second thing on top of that, which is texture. Painted metal fixtures are fine, but they are visually flat. Wooden beads, a wood ring and a rope wrap catch light unevenly, throw small shadows and give your eye something to look at even when the light is off. In rooms full of smooth surfaces (plaster, glass, laminate), that bit of roughness is what stops things feeling clinical.\n\nHow this chandelier works\n\nThe build is straightforward. An iron frame carries the structure and the wiring, a wooden ring forms the outer shape, and strands of wooden beads hang from it. Six candle-style holders sit within the frame and take E12 candelabra bulbs rated up to 40 watts each. Listed output is 2700 lumens in warm white, with a downlight method, meaning the light is directed down toward the table rather than bounced off the ceiling.\n\nBecause bulbs are not included, you get to pick the character of the light yourself. Clear filament bulbs give a visible glow inside each holder and lean harder into the rustic look. Frosted bulbs spread light more evenly and reduce glare if your table has a glossy top. Whichever you choose, buy all six the same. Mixed bulbs in a single fixture is one of those small things that looks wrong and you cannot stop noticing.\n\nFull brightness is what you want when you are serving a meal or helping with homework at the table. Half brightness is what you want for an hour of conversation afterwards. One fixture doing both jobs is far better than installing two.\n\nHeight is adjustable, so the fixture can be set at the right drop for your ceiling. On a standard ceiling, that usually means the bottom of the chandelier sits roughly 76 to 90 cm above the tabletop. Higher ceilings need a little more drop so the light does not float away from the table.\n\nWho it suits\n\nThis is a good fit if you have a dining table up to around 180 cm long, a round table seating four to six, or a kitchen island you want to anchor. At 22 inches wide, it has presence without dominating a medium room. If your table runs much longer than that, two smaller fixtures spaced along the table usually look better than one oversized piece.\n\nStyle-wise, it is listed as farmhouse, but it is more flexible than that label suggests. The neutral tones of iron, wood and beads sit comfortably in coastal rooms, boho rooms, cottage interiors and plenty of modern spaces that just need something warm to break up the hard lines. If you have been looking at rustic chandelier for living room ideas and keep rejecting things for being too themed, the neutral palette here is the reason this one tends to survive the shortlist.\n\nIt is not for every room. The fixture is listed as not water resistant and for indoor use only, so bathrooms, laundries and covered outdoor areas are out. It also needs a ceiling box rated for a hanging fixture, since the item weighs 12 pounds.\n\nHow to choose the right size and height\n\nStart with your table, not your room. Measure the table width and aim for a fixture roughly half to two thirds of that width. A 90 cm wide table pairs nicely with something in the 45 to 60 cm range, which is where this chandelier sits.\n\nThen think about clearance. Over a table, head height is not an issue, so you can hang low and get the benefit of concentrated light. In an entryway or hallway, you need at least 210 cm of clear space underneath so nobody walks into it. That is the single most common mistake people make with an entryway chandelier, and it is also the hardest to fix afterwards.\n\nFinally, consider the ceiling. Standard ceilings take the default drop fine. High ceilings need more chain so the light actually does something at table level. Sloped ceilings need the installer to check the canopy will sit properly against the angle before anything is wired in.\n\nInstalling it safely\n\nThis is a hardwired fixture running at a listed 120 volts, and we recommend a licensed electrician fits it. In many regions, DIY hardwiring is not legal, and in most it will complicate an insurance claim if something goes wrong later.\n\nMounting hardware is included and the fixture suits a standard ceiling electrical box. Before your electrician arrives, unbox everything and check the chain, canopy, beads and all six sockets are present and undamaged. It is far easier to sort out a transit problem before you have paid for a call-out. Do not cut or shorten the chain yourself, because a modified fixture is usually not returnable.\n\nIf you want a dimmer, say so when you book the electrician. Adding the dimmer at the same time as the fixture is cheap. Adding it three months later means a second visit.\n\nLooking after it\n\nWood and rope do not like water, which makes care simple. Switch off at the wall, let the bulbs cool, and dust the beads and frame with a dry microfibre cloth or a soft brush. If something sticky has landed on it, usually in a kitchen, use a barely damp cloth and dry it off straight away. Skip the solvents, the bleach and the scouring pads entirely.\n\nA quick dust every month or two is enough in most homes. Kitchens need it more often, because cooking grease drifts further than people realize and will hold dust against the beads.\n\nOnce or twice a year, have a look at the chain links, canopy screws and bulb seating. Everyday vibration loosens things slowly. Thirty seconds of checking is cheaper than any of the alternatives.\n\nKeep the fixture out of strong direct afternoon sun where you can. Wood tone shifts over long periods in harsh light, and that is true of any wood in a room, not just this one.\n\nThe short version\n\nIf your dining room is well furnished and badly lit, a hanging fixture over the table is the single highest-impact change you can make. This one gives you six warm candle-style lights, texture from wood beads and rope, an adjustable drop to suit your ceiling, and a dimmer-friendly setup so one fixture covers both dinner and the hour after it.\n\nMeasure your table, work out your drop height, buy six E12 bulbs at 40 watts or less, and book an electrician. That is the whole job. Keep it indoors, dust it occasionally, and check the fittings once a year. For a room you use every single day, it is a small amount of effort for a very noticeable result.", "llm_summary": "The 6-Light Wood Bead Chandelier (model 8803-6110V, UPC 755769100576) is an indoor farmhouse ceiling-mount chandelier. Materials are iron and wood with wooden bead embellishment, a brown wood shade and a flaxen color in an unfinished finish. Listed dimensions are 22 inches long by 22 inches wide by 26 inches high, item weight 12 pounds, shipping weight 5.44 kg, with adjustable height. Mounting hardware is included and the fixture is not water resistant. Bulbs are not included. Warranty is a 2 year limited manufacturer warranty. Country of origin is not specified by the maker.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns in original condition, buyer pays return postage; the consumer protection law of your state for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Chandelier Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://americanchandelier.net/6-light-wood-bead-chandelier/", "canonical_url": "https://americanchandelier.net/6-light-wood-bead-chandelier/", "json_url": "https://americanchandelier.net/api/products/6-light-wood-bead-chandelier.json", "updated_at": "2026-11-05" }